wnyc.org / 93.9fm / am 820

Comments

• [1] Chris from NJ March 12, 2008 - 09:15AM

  I just bought a house with a deck that is perhaps 15 yrs old. It is still in good shape but the finish is fading and I'm wondering how to best preserve it.

  Is it true that urethane is a bad idea for preserving a deck? If so, what do you recommend treating it with and how long can I expect a deck to last?

  
  
• [2] Sean McNall from Mineola, NY March 12, 2008 - 09:48AM

  I have an unheated, but insulated and glassed in sunroom that I am remodeling on the cheap. I don't want to spend $5000 on tiling the floor, but carpeting it would be impractical. Can I lay vinyl sheet? or will the fluctuating temperature in the room damage the adhesive?

  Sean McNall

  
  
• [3] Roxanne from Staten Island March 12, 2008 - 12:16PM

  My house was built in 1905. The hardwood floor in my first floor bay window flexes when it's walked on; it gets more noticeable near the wall. It seems as if there are no joists or subfloor under there. The basement does not extend under the bay, so I can't see what's underneath. I thought maybe trouble with the foundation although there aren't any cracks on the walls to indicate any other issue. What can I do?

  
  
• [4] Alden from Soho March 12, 2008 - 01:20PM

  One of the radiators in my apartment makes much more noise than the others when it releases pressure from the valve. It also has a different type of valve; the cylinder shaped kind with a smaller button/cylinder on the top, instead of the bullet shaped valve that the other two radiators have.

  If I replace the cylindrical valve with a bullet shaped valve, will the pressure release noises stop?

  Thanks.

  
  
• [5] glenn ligon from Brooklyn, NY March 12, 2008 - 01:25PM

  I have radiators that were spray painted silver by a contractor. when the heat in the building came on the radiators off gas. is there a sealant I can use on them to kill the smell or do they have to be stripped?

  
  
• [6] Ryan from Brooklyn, NY March 12, 2008 - 01:30PM

  I am wanting to strip bubbling, old white paint off of interior exposed brick and seal it so I can let the brick be it's beautiful self. How do I strip the brick and what should I use to seal it?

  
  
• [7] Amy from Manhattan March 12, 2008 - 01:35PM

  My bedroom ceiling leaked rain water in a big puddle on my brand new mattress (Gold Bond Futon). The water went all the way through my mattress to the other side. I used bleach to clean the stains (looked a little rusty) on both sides. I've since encased it in a waterproof mattress cover. Do I need to worry about mold or mildew (The mattress was left uncovered for a couple of weeks to dry out). Also, how can I get it cleaned in a non-toxic way? Thank you!

  
  
• [8] Krishna from Brooklyn March 12, 2008 - 01:46PM

  I am a Brooklyn renter in a great, but poorly maintained pre-war building. I just found out that a bar is moving into the store front below my apartment. I used to be able to hear the tenants talking at normal level, but now with the noise level that comes with a bar I'm not sure if we'll be able to stay in this apartment.

  The bar-owner says he'll try to work with me. I'm hoping you can tell me a great (but economically-modest) way to insulate sound. I don't want to move!

  Thank you.

  
  
• [9] andrea saggese from 413 3 st, Brooklyn, NY March 12, 2008 - 01:53PM

  I own a brownstone in Park Slope. As you may know the brownstones are attached, separated only by a firewall. The next door building had a leak and the water seeped through to our side of the building. The tenant in second floor apartment has complained of an odor of dampness and was concerned about mold. We live on the first floor and we also smell an odor that I would describe as wet dirt. Do you think there could be mold? Also what can we do to eliminate the odor. Thank You

  
  
• [10] Tom Shulski from Mastic Beach, Long Island March 12, 2008 - 01:55PM

  My refrigerator leaks water. It does not have an ice maker. I found that it was tilted, so I adjusted one leg and thought I fixed the problem because it stopped for awhile. But, it has started again. I looked in front all the way at the bottom, but, did not see the evaporation pan. I guess it is in the rear.

  
  
• [11] Kate from UWS March 12, 2008 - 01:57PM

  When we bought our apt. in 2004, we replaced the wood floor boards in half the space because the old floor was a splintery ruin. Now - only three years 1/2 later - much of the new floor is a patchwork of splotches and scrapes and spots where the surface appears to be coming off, leaving ugly dark places underneath. How could this be happening, after such a short time? Does the original floorer have any responsibility for fixing? CAN it be fixed? (Ie, is it cheap wood, or was it just a bad polyur. job?)

  Many thanks for your reply.

  Kate

  
  
• [12] Harriet Siegel from Eastchester, NY March 12, 2008 - 04:52PM

  I have black mold growing on the ceiling (9' high)and upper walls of a small bathroom in my apartment. There is a window, but no fan. I have used clorox to clean it periodically, but it soon returns, especially in the summer. The walls are lined with a slightly textured liner and painted over. The mold seems to have permeated the liner and paint and cannot be completely removed with the clorox. What can I do to resolve this problem and does the liner and plaster underneath have to be removed? Is this a health risk? Thank-you.